Machinery

Automatic Shuttering Station E9

Automatic Shuttering Station E9

Elematic shuttering station E9 is the most suitable solution for various shuttering functions.

In the automated shuttering process the shuttering robot places shutterings on the table directly either from the active or the passive storage. It’s fully automated control enables fast and accurate shuttering process.

Batching and Mixing Plant E9

Batching and Mixing Plant E9

The Elematic Batching and Mixing Plant E9 is a tower type concrete mixing plant designed to be a part of the automated concrete delivery system in precast production.

It is equipped with a twin shaft mixer to produce up to 105m3/h of high-quality concrete.

Batching and mixing plant P7

Batching and mixing plant P7

The Elematic Batching and Mixing plant P7-40 is a small, mobile and modular concrete mixing plant designed to be a part of an automated concrete delivery system in precast production.

It is equipped with a twin shaft mixer to produce 40 m3/h of high-quality concrete.

Batching and mixing plant S5-20

Batching and mixing plant S5-20

The Elematic Batching and Mixing plant S5 is a small, mobile and modular concrete mixing plant with a planetary mixer to produce up to 20 m3/h of high-quality concrete.

Batching and mixing plant S5-40

Batching and mixing plant S5-40

The Elematic Batching and Mixing plant S5-40 is a small, mobile and modular concrete mixing plant with a twin shaft mixer to produce up to 40 m3/h of high-quality concrete.

Battery mold

Battery mold

The Elematic battery mold is a productive, space saving cassette casting method for vertically casting all kinds of precast solid slabs. It is available in cold shutter and traditional variants, as well as in one-sided and two-sided versions.

The Elematic battery mold offers high production capacity in a very compact format because all casting and handling is done in the vertical position. It is durable, easy to handle and easy to operate.

Caster P7

Caster P7

Elematic Caster P7 casting machines are available as half-portal or bridge-type, with sector gates or with a belt feeder.

They are well suited to casting horizontal molds, battery molds and special molds.

Cleaning machine E9

Cleaning machine E9

The Elematic cleaning machine E9 is designed to clean the table surfaces before they are re-outfitted in precast wall production.

Comcaster E9

Comcaster E9

The Elematic Comcaster E9 is designed to cast and pour concrete for precast wall panel production. It offers a fast casting speed of up to 2000 l per minute with self-compacting concrete and up to 1000 l per minute with wet concrete.

Compaction station E9

Compaction station E9

The Elematic compaction station E9 is designed for compacting of concrete in molds.

The Elematic compaction station E9 is equipped with hydraulically operated lifting and lowering roller brackets to place a mold onto separate compaction brackets.

The compaction station E9 is designed for molds without wheels.

The delivery contains compaction brackets, roller brackets, friction wheels, hydraulic pipework and hydraulic unit.

Comskip S5

Comskip S5

The Elematic Comskip S5 is designed to transport and cast a variety of concrete mixes during the production of precast products such as walls, beams and columns on a table or in a battery mold.

Curing chamber

Curing chamber

The Elematic curing chamber E9 is designed for automatic curing and humidity control of precast wall panels.

Door and window mold

Door and window mold

The FaMe system is an excellent solution for window and door openings where you need an exact 90 degree angle.

FaMe Flex

FaMe Flex

The Elematic FaMe Flex system is a cost-effective solution for beam and column production when the need is occasional. The Fame Flex system can be used on a hollow core slab bed, for example.

FaMe Flex Pro

FaMe Flex Pro

FaMe Flex Pro magnet shuttering system is designed for the production of wall panels of up to 600 mm in thickness. It is particularly well-suited for making facades, insulated sandwich walls and solid walls.

Fame Lite

Fame Lite

The FaMe Lite series is designed for bulk production of non-insulated precast products. The series suits to both horizontal casting on tables and vertical casting on battery molds.

Floating machine E9

Floating machine E9

The Elematic floating machine E9 is designed to smoothen precast wall panels. It is suitable for all types of wall production lines.

The floating machine E9 is an easy to use, mechanized method for smoothing precast product surfaces. The machine features a rotating mechanism with a rotating steel disc or floating blades that level the surface of the panel.

Lift E9

Lift E9

The Lift E9 has been specially designed for EDGE Wall production line. It moves cast tables into the curing chamber and the cured tables out.

Lifting beam E9

Lifting beam E9

The Elematic lifting beam E9 is designed to lift precast wall panels with a one-hook bridge crane inside a factory or in a stockyard.

Lifting beam E9, automatic

Lifting beam E9, automatic

The Elematic automatic lifting beam E9 is designed to lift precast wall panels inside a factory or in a stockyard.

Lifting beam P7

Lifting beam P7

The Elematic lifting beam P7 is designed to lift precast wall units with a one-hook bridge crane inside a factory or in a stockyard.

Magnets

Magnets

The Elematic FaMe magnet shuttering system includes magnets of different types and sizes for various purposes. The magnets include patented jaw-type push button magnets and special magnets for high temperatures.

Multifunction wagon S5

Multifunction wagon S5

The Elematic multifunction wagon S5 is designed to tilt, vibrate and transport molds on a precast wall production line.

The multifunction wagon S5 has both compaction and tilting features. It is equipped with four wheels and is positioned under the table during casting. It uses four hydraulic cylinders for compaction. After curing, the multifunction wagon can tilt the table to remove the finished wall unit.

Plotter E9

Plotter E9

The Elematic Plotter E9 is designed to mark the location of side forms, window and door openings and other inserts on the table surface in a precast wall production line.

The Plotter E9 transfers the product geometry and mold position directly from the Elematic Plant Control WallMES manufacturing execution system to the mold surface according to the production plan.

Profiles

Profiles

The Elematic FaMe magnet shuttering system includes durable, light, recyclable aluminium profiles.

Shuttering accessories

Shuttering accessories

The Elematic FaMe magnet shuttering system can be adapted to several different applications. A wide range of adapters can be used with any existing side forms.

Shuttle E9

Shuttle E9

The Elematic Shuttle E9 is designed for fully automatic concrete distribution on a two‐rail track from the batching and mixing plant to an intermediate silo or to a casting machine in precast concrete production.

The Elematic fully automated concrete distribution system includes Shuttle E9, a track and a cleaning system. This offers a fast and reliable way of distributing concrete between the B&M plant and desired casting spots. The system can be adapted to existing B&M plants.

Skip S5

Skip S5

The Elematic Skip S5 is used to transport concrete to an extruder in precast concrete production. It can be moved between the B&M plant and the extruder by forklift, truck or crane.

Stacking frame P7

Stacking frame P7

The Elematic stacking frame P7 designed for safe lifting of cast and empty tables in standard precast wall production.

Table E9

Table E9

The Elematic table E9 is designed to operate as part of a circulation line during precast concrete production. It is intended for the manufacture of sandwich panels, solid panels, cladding panels and solid slabs.

Table P7

Table P7

The Elematic table P7 is designed to operate as part of a circulation line during precast concrete production. It is intended for the manufacture of sandwich panels, solid panels, cladding panels and solid slabs.

Table S5

Table S5

The Elematic table S5 is intended for the manufacture of sandwich panels, solid panels, cladding panels and solid slabs.

Tilting station E9

Tilting station E9

The Elematic tilting station E9 is specially designed for PRO and EDGE Wall production lines. It is designed for tilting the table for stripping of the cured precast product.

Tilting table S5

Tilting table S5

The Elematic tilting table S5 is designed for the manufacture of special precast products, such as facade panels, in low volumes. The Elematic tilting table S5 has a sturdy steel construction with a cold-rolled smooth and flat 8 mm thick surface plate for top-rate precast product quality.

Transfer wagon E9

Transfer wagon E9

The Elematic transfer wagon E9 is designed to transfer horizontal molds longitudinally and laterally on a circulation line during precast wall production.

Transport wagon E9

Transport wagon E9

The Elematic transport wagon E9 is designed to transport precast concrete wall panels out of the production hall to outdoor storage.

Wagon puller

Wagon puller

The Elematic wagon puller is designed to move transport wagons with precast slabs from the production hall to the storage area in precast concrete plants.

Vacuum table

Vacuum table

The Elematic vacuum table is especially designed for the production of precast wall panels with a graphic concrete surface.

Deliveries

The map shows the countries to which we have delivered our products

Deliveries

Mapa

Mapa
GermanyPolandAustriaEstoniaFinlandItalyNorwayRomaniaSwedenSlovakiaCzech

Germany

Poland

Austria

Estonia

Finland

Italy

Norway

Romania

Sweden

Slovakia

Czech

Germany Finland Norway Austria Estonia Italy Poland Romania Sweden Czech Slovakia